Following the popular Beach Fighter theme, another addition to the beach in Cammy White. As Cammy’s costume is a little on the non existing side when seen in pictures, decided to go for a mono-kini . . Beach Fighter1 can be found FREE on this website
5 heads with this one! Yes the Default head and four other interchangeable heads with various expressions.
2 Torso’s, one Bikini top and one Topless. . . .
The base is in 2 parts and the large part recessed to allow LED or other light source, should you print the water splash in transparent material . …
I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED
All of the parts are orientated to print base ready to print with your favourite slicer . .
All parts are cut files to fit build plate of small resin printers like the Photon, examples in images SLA orientated for least support and strongest print orientation, as seen in the images.
These orientations work for FDM printing but you may find a better orientation that reduces support.
All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.
The model is 1/6 scale and is approx. 340mm tall/long on its full base.
Why cut into many smaller parts I have been asked?
TIPS: Resin Printing; Do not left arm, the braids or the left foot to keep strength for supporting model and the steel pin used in her base. Rest of parts at 2.40mm All parts will fit into small SLA printer. All parts on FDM were print tested at 0.12 speed 50 ALWAYS dry assemble and “trim” parts prior gluing. You can actually assemble the full model prior painting, no difficult areas to paint.