An otherworldly alien bust sculpt, showcasing elongated head features, detailed bio‑organic textures, deep eye sockets, and subtle structural tubing. Designed to evoke a sense of eerie sophistication and sci‑fi horror. The model is manifold and repair‑checked, ready for scaling, slicing, and printing.

Printing Details:

Printer Type: FDM or Resin (SLA/DLP)

Layer Height: ~0.1‑0.2 mm for FDM; 0.05‑0.1 mm for resin for fine detail

Infill: 15‑25% (gyroid or cubic works well)

Shells / Walls: 2‑3 perimeters; thicker around thin features like ridges, tubes

Supports: Required for under‑chin, overhangs in eye area, underside of head, any protruding tubing

Material: PLA or PETG for FDM; standard or high‑detail resin for SLA/DLP

Orientation: Tilt head slightly upward to minimize supports under chin; place the face looking upward to avoid large support marks

Build Plate Adhesion: Use brim/raft if base is small relative to bust height to prevent lift or warping

Optional Hollowing & Drain Holes: Especially for resin prints—hollow internals with ~2‑3 mm walls and add drain holes if resin version

Post‑Processing: Remove supports carefully, sand/polish details; resin prints need washing & curing; optional priming & painting to accent texture