A detailed bust of Albert Einstein, featuring his iconic wild hair, expressive face, thoughtful gaze, and characteristic mustache. Designed to be a dignified and realistic homage, capturing age‑lines and texture. Watertight and ready for 3D printing, perfect for science lovers, educational displays, or collectors.

Printing Details:

Printer Type: FDM (filament) or Resin (SLA/DLP)

Layer Height / Resolution: ~0.1–0.2 mm for FDM; 0.05–0.1 mm for resin to capture fine facial features and hair texture

Infill: ~15‑30% (gyroid or cubic recommended)

Walls / Shells: 2‑3 perimeters; reinforce thinner facial or hair regions if possible

Supports: Required especially under chin, ears, hair overhangs, underside of bust; orientation should minimize large support areas

Material: PLA or PETG for FDM; standard/high detail resin for resin printing

Optional Hollowing & Drain Holes: For large resin prints, hollow interior with ~2‑3 mm wall; add drain holes to avoid trapped resin

Build Plate Adhesion: Use raft or brim if base is narrow or model is tall to avoid tipping or warping

Post‑Processing: Remove supports, sand smooth; prime and paint if desired; for resin prints: washing + curing