Based off of the Swordsmith masks from the Swordsmith Village arc of Demon Slayer, this mask is designed to be 3d printed and worn for cosplay, displays, or any other application you may want it for. The model contain millions of faces to ensure a smooth print finish however this means it is not meant for digital production of videos, animation, or other media content. While it is not impossible to use it for media, it will slow down the process significantly to the point of becoming a hinderance.

The model measures 6 3/4 inches by 5 2/5 inches which generally fit my face. Feel free to adjust the dimensions to you particular size if you intend on wearing it. for the completed photos where the mask is painted I simply used a bit of sanding and acetone to smooth out the print lines and applied acrylic paint and spray paint to achieve the color and finish. the process was fairly simple and only took a couple hours total. I do have a relatively small printer measure only 6 cubic inches for the print bed but by printing at a 90 degree angle, I was able to print the mask all in one go. Obviously for larger printers, this is not an issue however, the mask is printable by the majority of standard 3d printers.

If there are any concerns about the model or the process of making feel free to reach out and I will help you in whatever way I can.