Attention: Please, this 3D model is only for personal printing (Please contact me if you want to use it for Commercial Purposes)

• All files are in STL format.

• Model printed in parts.

Zeronos Cards: Altair, Vega and Zero cards STL files.

5 STL files:

Since the yellow side (Vega) is the back part for both the Altair card and the Zero card, 3 STL files contain only one detailed side (ALTAIR_SIDE, VEGA_SIDE, and ZERO_SIDE) to be printed without damaging the details on both sides. These should be glued (or using your preferred adhesive) immediately after printing.

Complete versions of the cards are also available (ALTAIR_AND_VEGA_CARD_FULL and ZERO_CARD_FULL).

Important: Not compatible with DX Zeronos Belt KAMEN RIDER DEN-O (Officially released by Bandai).

Width - 79,29mm (7,9cm)

Height - 53,98mm (5,3cm)

The STL files are able to be printed as a cosplay item, display item, figure item.

This model is a dummy replica item.

• For stable 3D printing, I recommend using the Bambu Studio software.

For FDM of DLP/SLA tecnology

FDM Config.:

Layer height 0.2 Perimeter Shell 3 Fill 10/15% Supports are needed Speed 60-70%

It is strictly prohibited to edit, modify, or combine these files for resale. Using these images to promote other products is also forbidden. The model includes distinct and easily recognizable features for identification.