Atention: Please, this 3D model is only for personal printing (Please contact me if you want to use it for Commercial Purposes)

• All files are in STL format.

• Model printed in parts.

3 cutting variations plus 1 uncut variation for sword printing are available:

CUT TYPE 1 - STL file with the blade, the handguard and the handle. (The blade itself serves as a pin that joins the handguard and the handle. This applies to all types of cutting).

CUT TYPE 2 - STL file with the blade divided into 5 parts, the handguard and the handle divided into 2 parts , with pins to fit them together.

CUT TYPE 3 - STL file with the blade divided into 10 parts, the handguard and the handle divided into 4 parts with pins to fit them together. (Important: This cutting model for 3D printing was made with a vertical cut to divide the sword in half). Perfect for small 3D printers.

UNCUT - STL full uncut.

Size: 1282mm (128cm)

The STL files are able to be printed as a cosplay item, display item, mini figure item.

This model is a dummy replica item.

• For stable 3D printing, I recommend using the Bambu Studio Software (Cosplay) and CHITUBOX 64 (Figure).

For FDM of DLP/SLA tecnology

FDM Config.:

Layer height 0.1Perimeter Shell 3Fill 10/15%Supports are neededSpeed 60-70%

This 3D model of the Uramasa sword was made for fans of the Power Rangers Samurai/Samurai Sentai Shinkenger and also for everyone who likes swords in general.

ATTENTION: All parts were cut thinking of the size of the printing bed of the 3D printers and not for each color that the part has. So the part of coloring the pieces before/ after being printed is up to the customer’s preference!

It is totally prohibited to edit, manipulate and mix this file for resale. The use of images to promote other products is also prohibited. The modeling contains easily identifiable shapes.