Geneve is a table lamp with the particularity of being a luminous silhouette. The base is elongated up to the upper tip and is more illuminated than the diffuser. The diffuser stands independently on the base, which extends to act as a support for the lamp holder. The asymmetry of the diffuser and the base allows the plane to be illuminated more deeply in relation to the orientation. The diffuser stands independently on the base, which extends to act as a support for the lamp holder.
Dimensions when assembled: 190 x 190 x 230 mm. A 200x200x200 printing volume will be enough.
Don't stretch the model, it requires a specific hole diameter to fit the lamp holder.
To be completed, it just requires an E14 lamp holder and an E14 Led Bulb.
Check the rest of the collection on my profile!
Notes: Model thickness is 0,8 mm for diffuser and for the base.
For a good lighting result it is suggested to generate the wall with wall line count: 2, using a 0.4 mm nozzle and a layer height of 0.2 mm.
At least for the diffuser, it's important to set the seam in only one point, so as to have a very clean surface.
No support is required. No post-printing is required.