HEIRLOOM MEDALIONS FROM ELDEN RING 3D print model

These are the four Heirloom type medalions from elden ring. They are wearable, and almost perfectly mimic the originals.

Size: H6,2 cm x W5,6 cm x D1,4 cm H2.4inchx W2.2 inch x D0.55 inch

For printing: I would advise printing them standing up, like how the model loads. I printed them with 0.08 mm layer height so all the small ridges are coming out nicely. The grooves making the pictures are quite small, around 1mm wide, little less deeper.