IJN Mogami

IJN Mogami 3D model

Description

would also like to draw your attention to 3d studio spline: https://www.instagram.com/spline.3d/ https://vk.com/spline

For the 1931 Fleet Replenishment Program, believing themselves understrength in cruisers, the IJN chose to build to the maximum allowed by the Washington Naval Treaty. This resulted in the choice of 155 mm (6.1 in) guns in five triple turrets (a first for Japan) in the Mogamis, also capable of 55° elevation, making the Mogamis one of the very few classes of cruiser to have a dual purpose (DP) main battery; this was coupled with very heavy anti-aircraft protection, as well as the standard reloadable, turreted torpedo launchers, also unique to the IJN.

To save weight and improve transverse stability, the class was given a more compact and lower superstructure, electric welding was used, as was aluminium in the superstructure. Aiming to meet the weight limits compelled them to fit only ten boilers (compared to twelve in the previous Takao and Myōkō classes), and the chimney arrangement was designed to minimize weight as well; the middle funnel featured no chimney of its own, instead venting its exhaust gasses into the underside of the forward chimney, which itself was reclined from its base so that, at its top, it merged with the aft funnel's chimney. The new geared impulse turbines added 22,000 shaft horsepower (16,000 kW) over Atago, increasing the top speed by 1.5 knots (2.8 km/h). Protection, however, was not stinted on; the class proved able to take substantial punishment.

The declared weight was 8,500 tons, though the true design weight was 9,500 and at trials they would displace 11,169 tons.

The designers, however, had overreached; excessive topweight led to instability, and gunnery trials revealed cracking hull welds. Hull bulges were retrofitted to Mogami and Mikuma, and added to Kumano and Suzuya, increasing beam to 20.5 m (67 ft) and displacement to 11,200 tons, cutting speed by 2 knots (3.7 km/h).

Following Japan's withdrawal from the Second London Naval Treaty, plans were made to modernize and expand the entire fleet. Beginning in 1939, the class was brought in for substantial reconstruction, replacing the triple 155 mm turrets with twin 203 mm (8-inch) guns, turning over the 155 mm turrets for the battleships of the Yamato class. Indeed, the designers had designed the class in mind so that the 6-inch guns could be switched with 8-inch batteries, in effect making them heavy cruisers and skirting the London Naval Treaty, though the Japanese had withdrawn from the conference and were not signatories to the Second London Naval Treaty of 1936.

Torpedo bulges were also added; in all, displacement rose to over 13,000 tons, and speed dropped to 34.5 knots (63.9 km/h).

The United States Navy's Brooklyn-class cruisers were designed specifically to counter the Mogami class, and as a result had a very similar armament to the pre-refit Mogamis, in a nearly identical layout, though the US-pattern Mark 16/1 triple 6 in /47 Turret weapon was semi-automatic, with a higher rate of fire and the three weapons in each turret mounted in a single sleeve. Japan's choice of the 155 mm gun caliber is curious, as Japan already had a 6-inch (152 mm) weapon in service, of nearly equal performance. In spite of the resulting multiplicity of similar gun calibers, Japan resented the 5-5-3 treaty ratios, and had vowed to build to the very limit allowed by the 1922 Washington and 1930 London Naval Treaties. As the French had already used a 155 mm main battery in the three Duguay-Trouin-class cruisers (1922–1926), this became the largest gun caliber allowed for light cruisers under the 1930 London Naval Treaty.

Крейсера типа «Могами» (яп. 最上型巡洋艦 Могамигата дзюнъё:кан) — серия из четырёх японских крейсеров постройки 1930-х годов.

Проект разрабатывался на фоне подписанного в 1930 году Лондонского морского договора, лишившего Японию на период действия этого соглашения (1931—1936) возможности строить новые тяжёлые крейсера. Новые крейсера с 155-мм артиллерией главного калибра (ГК) были призваны их заменить, выполняя те же боевые задачи. Летом 1931 года был утверждён созданный по руководством капитана 1-го ранга Кикуо Фудзимото базовый проект № C-37. Заказы на четыре крейсера были выданы в марте 1931 года в рамках Первой программы пополнения флота. Строительство первой пары, получившей названия «Могами» и «Микума», велось в 1931—1935 годах Арсеналом флота в Курэ и верфью «Мицубиси» в Нагасаки. Второй пары, «Судзуи» и «Кумано» — в 1933—1937 годах Арсеналом флота в Йокосуке и верфью «Кавасаки» в Кобэ.

Крейсера представляли собой гладкопалубные корабли с S-образной носовой оконечностью, волнообразной верхней палубой и массивной носовой надстройкой. Корпус был максимально облегчён за счёт уменьшения толщины листов обшивки и применения электросварки. Четырёхвальная паротурбинная установка мощностью 152 000 л. с. (111,8 МВт) обеспечивала максимальную скорость хода 37 узлов, а запас топлива позволял пройти 8000 морских миль 14-узловым ходом. Главный калибр корабля включал пятнадцать 155-мм орудий Тип 3 с длиной ствола 60 калибров в пяти трёхорудийных башенных установках, с максимальной дальностью стрельбы 27,4 км. Для защиты от воздушных целей имелись восемь универсальных 127-мм орудий Тип 89 в четырёх спаренных установках и два 40-мм автомата типа «Би» (заменены на четыре спаренных 25-мм автомата и два спаренных 13,2-мм пулемёта Тип 93). Развитое торпедное вооружение включало четыре строенных 610-мм торпедных аппарата с системой механизированной перезарядки, рассчитанных на использование парогазовых торпед тип 90. На борту имелись три разведывательных гидросамолёта, запускаемых с двух катапульт арсенала Курэ Тип № 2 мод. 3. Броневая защита крейсера была рассчитана на прикрытие погребов от попаданий 203-мм снарядов, а энергетической установки — от попаданий 155-мм снарядов; толщина прикрывающего их броневого пояса достигала 140 и 100 мм, соответственно. Нижняя кромка пояса играла роль противоторпедной переборки, сверху эти отсеки накрывала броневая палуба толщиной от 35 до 60 мм, боевая рубка защищалась до 100 мм брони. Экипаж корабля должен был состоять из 930 человек, в том числе 70 офицеров.

В процессе строительства и в начале службы крейсера прошли в 1934—37 годах две масштабные модернизации, направленные на улучшение прочности корпусов и остойчивости. В 1939—40 годах на них были заменены башни ГК с 155-мм на 203-мм, как первоначально и планировалось.

Сведённые в 7-ю дивизию крейсера типа «Могами» активно участвовали в боевых действиях на Тихоокеанском театре Второй мировой войны, в том числе в захвате Малайи, Нидерландской Ост-Индии, походе в Индийский океан, сражениях у атолла Мидуэй, у островов Санта-Крус и в Филиппинском море и заливе Лейте. «Микума» погиб при Мидуэе, «Судзуя» и «Могами» — при Лейте, а «Кумано» — вскоре после него. В ходе войны крейсера прошли три военные модернизации, в том числе «Могами» был перестроен в авианесущий крейсер

Item rating
1 0
IJN Mogami
$20.99
 
Custom License 
IJN Mogami
$20.99
 
Custom License 
Response 87% in 1.0h
3D Modeling
3D Print Modeling
Low-poly Modeling
Texturing

3D Model formats

Format limitations
  • 3D Studio (.3ds) (2 files)46.2 MB
  • Autodesk FBX (.fbx) (2 files)46.2 MB
  • OBJ (.obj, .mtl) (2 files)46.2 MB
  • Stereolithography (.stl) (2 files)46.2 MB
  • Textures 46.2 MB

3D Model details

  • Publish date2019-11-03
  • Model ID#2149502
  • Animated
  • Rigged
  • VR / AR / Low-poly
  • PBR
  • Geometry Polygon mesh
  • Polygons 21,891
  • Vertices 2,996,898
  • Textures
  • Materials
  • UV Mapping
  • Unwrapped UVs Unknown
  • Plugins used
  • Ready for 3D Printing
Help
Chat