Head Watercraft

Head Watercraft Low-poly 3D model

Verification details of the FBX file
Files
FBX file format
Scene
Supported object types
Geometry
No N-gonsManifold geometryNo faceted geometry
Textures and Materials
Missing required texturesPower of 2 texture sizesNo embed texturesAssigned materialsTexture aspect ratio
UVs
UV unwrapped modelNo overlapped UVs per UV island
Naming
Allowed characters
Description

The head (pl. heads) is a ship's toilet. The name derives from sailing ships in which the toilet area for the regular sailors was placed at the head or bow of the ship.The head (pl. heads) is a ship's toilet. The name derives from sailing ships in which the toilet area for the regular sailors was placed at the head or bow of the ship. In sailing ships, the toilet was placed in the bow somewhat above the water line with vents or slots cut near the floor level allowing normal wave action to wash out the facility. Only the captain had a private toilet near his quarters, at the stern of the ship in the quarter gallery.

The plans of 18th-century naval ships do not reveal the construction of toilet facilities when the ships were first built. The Journal of Aaron Thomas aboard HMS Lapwing in the Caribbean Sea in the 1790s records that a canvas tube was attached, presumably by the ship's sailmaker, to a superstructure beside the bowsprit near the figurehead, ending just above the normal waterline.

In many modern boats, the heads look similar to seated flush toilets but use a system of valves and pumps that brings sea water into the toilet and pumps the waste out through the hull (in place of the more normal cistern and plumbing trap) to a drain. In small boats the pump is often hand operated. The cleaning mechanism is easily blocked if too much toilet paper or other fibrous material is put down the pan.

Submarine heads face the problem that at greater depths higher water pressure makes it harder to pump the waste out through the hull. As a result, early systems could be complicated, with the head fitted to the United States Navy S-class submarine being described as almost taking an engineer to operate.Making a mistake resulted in waste or seawater being forcibly expelled back into the hull of the submarine.[1] This caused the loss of German submarine U-1206.

The toilet on the World War I British E-class submarine was considered so poor by the captain of HMS E35 that he preferred the crew to wait to relieve themselves until the submarine surfaced at night. As a result, many submarines only used the heads as an extra storage space for provisions.

Aboard sailing ships and during the era when all hands aboard a vessel were men, the heads received most of their use for defecation; for routine urination, however, a pissdale was easier to access and simpler to use.

READY FOR 3D PRINT

Item rating
0 0
Head Watercraft
$9.78
 
Royalty Free License 
Head Watercraft
$9.78
 
Royalty Free License 
Response 67% in 12.0h

3D Model formats

Format limitations
  • OBJ (.obj, .mtl) (2 files)615 KB
  • KeyShot (.bip, .ksp) (2 files)490 KBVersion: 10Version: 10
  • USDZ (.usdz)5.84 MB
  • glTF (.gltf, .glb)31.7 MB
  • Sketchup 2019 (.skp)771 KB
  • Autodesk FBX (.fbx)133 KB
  • Stereolithography (.stl)198 KB
  • 3D Manufacturing File (.3mf)6.43 MB

3D Model details

  • Publish date2022-08-23
  • Model ID#3946823
  • Animated
  • Rigged
  • VR / AR / Low-poly
  • PBR
  • Geometry -
  • Polygons 0
  • Vertices 0
  • Textures
  • Materials
  • UV Mapping
  • Unwrapped UVs Unknown
  • Plugins used
  • Ready for 3D Printing
Help
Chat