TRX-4 Standard Servo Differential Lock 3D model

Tired of replacing the micro servos on your TRX-4? This is a mount to convert your mini/micro diff lock servos into one standard servo. You will need to remove the stock mount and replace it with this one. The servo horn I used is one of the ones that came with my servo, just mounted the ball ends from the factory servo horn onto the new one 180 degrees from each other. Obviously some endpoints will need to be set for the new servo and some spacers may be needed to make the cables as straight as possible (depending on the servo you choose). Some jury rigging may be necessary.

Any feedback is appreciated! I made this for a custom cage build (using a TRX trans and lockers). If you plan to use this on a standard TRX-4, you'll have to relocate your radio box as they won't both fit on that side of the truck. The radio box will fit above the shifter servo on the other side of the truck.

Two versions are included: and inside and outside mount. I've found it to be easier to assemble/remove the inside mount and you don't have to cut a tab off your servo, either. This version also has shorter 'arms' that the T-Lock cables attach to, so they are more durable, too. Depending on your servo, you may find the outside easier.