Oak School House Chair

This is high poly 3d modelNo hidden objectsAll objects groupedAll objects have materialsNo missing textures and texture paths clearedAll objects have 1:1 scaleFile have only model, no lights or camerasUnit scale cm 1:1

The seat is saddled and also rounded in front for maximum comfort.

Overall Dimensions 18 1/2Wide X 20 1/2 Deep X 35 1/4" High

https://www.kpetersen.com/schoolhousechairs.htm

The top cross back is made from 1lumber, steam bent and rounded on the front edge. The lower cross back is also made from 1 lumber, steam bent and double doweled to the back posts with spiral dowels.The vertical form-fitting slats are finished 1X 3/8 and mortised into the top and bottom cross backs. The front posts (legs) are made from 2lumber, tapered from the seat rail to the floor.The back posts (legs) are steam bent and are made from 1 1/4 lumber. The stretchers are of H type construction consisting of two side stretchers and one cross stretcher from 1lumber.One extra 1 stretcher is chucked and glued to the back posts several inches below the seat. The School House Side Chairs also have steam bent braces that are glued and screwed to the seat and back posts for added strength.The chair frame is further reinforced with corner blocks which are glued and screwed to the seat rails. All corners and edges of the chair are rounded.